flourocarbon leader
+3
Steve French
adie1200
cavemandom
7 posters
PikeAngler :: Fishing :: Pike Fishing
Page 1 of 1
flourocarbon leader
I,m new at piking I have only been piking since Sept 09, so far I'v managed to get by on bits and bats of advice from my local tackle shop and reading on the net, I want that extra edge, I recently read using a flourocarbon leader would improve my chances, I have braid on my reel, how do I use the flouro as a leader ? do I still need to use a steel trace also?, cheers Dominic......
cavemandom- Posts : 153
Join date : 2010-01-07
Re: flourocarbon leader
You must always use a steel trace wire as pike will bite through flourocarbon like a knife through butter
Loads of info on here Plus lots of help from most if not all members
Just ask !!
Adie
Loads of info on here Plus lots of help from most if not all members
Just ask !!
Adie
Re: flourocarbon leader
Dominic, the best advice i got when I took up Pike fishing, and its only 5 years ago, was to go out with experienced Pikers, there is no substitute for getting tips and seeing how it is done. I spent a lot of time asking around tackle shops etc, dont get me wrong they did their best, but learning on the bank with someone that knows what its about, is the way to go. I am not sure where you live, but i bet one of our forum members lives near you and I am sure they would gladly help, good luck
Steve French- Posts : 738
Join date : 2008-11-12
Age : 69
Location : Middleton Derbyshire
Re: flourocarbon leader
thanks steve, I actually live in Oswestry but i'm a native Boltonian, I dont know anyone in the area, should I ask for someone to fish with on this forum by way of a thread???
cavemandom- Posts : 153
Join date : 2010-01-07
Re: flourocarbon leader
Hi Dominic if you introduce yourself here
https://pikeangler.forumotion.com/new-member-introductions-f8/welcome-cavemandom-t741.htm
And let members know where you are from and ask if theres anyone nearby who fancys a meet
Adie
https://pikeangler.forumotion.com/new-member-introductions-f8/welcome-cavemandom-t741.htm
And let members know where you are from and ask if theres anyone nearby who fancys a meet
Adie
Re: flourocarbon leader
Steve French wrote:Dominic, the best advice i got when I took up Pike fishing, and its only 5 years ago, was to go out with experienced Pikers, there is no substitute for getting tips and seeing how it is done. I spent a lot of time asking around tackle shops etc, dont get me wrong they did their best, but learning on the bank with someone that knows what its about, is the way to go. I am not sure where you live, but i bet one of our forum members lives near you and I am sure they would gladly help, good luck
Here Here....
BradfordLad- Posts : 130
Join date : 2009-11-01
Location : Bradford City
Re: flourocarbon leader
Hi
Do you mean you want to use flourocarbon leader or a flourocarbon trace?
If you mean flouro trace then do not never ever use anything but wire for traces.
If you mean leader then don't bother as you will be adding an unnecessary knot.
Andy Webster
Do you mean you want to use flourocarbon leader or a flourocarbon trace?
If you mean flouro trace then do not never ever use anything but wire for traces.
If you mean leader then don't bother as you will be adding an unnecessary knot.
Andy Webster
_________________
Andy Webster
www.pikeangler.co.uk
Re: flourocarbon leader
Thanks Andy I did mean using the flourocarbon as a leader, I'm using braid at the mo I thought a flo leader would give me a little bit of an edge, you just answered my ? in one, cheers, what trace would you advise, I'v been buying the made up leads from my local tackle shop but I want to start throwing my own together, do you have any suggestions on which wire to use,swivels n snap links, cheers....Andy Webster wrote:Hi
Do you mean you want to use flourocarbon leader or a flourocarbon trace?
If you mean flouro trace then do not never ever use anything but wire for traces.
If you mean leader then don't bother as you will be adding an unnecessary knot.
Andy Webster
cavemandom- Posts : 153
Join date : 2010-01-07
Re: flourocarbon leader
cavemandom wrote:
Thanks Andy I did mean using the flourocarbon as a leader, I'm using braid at the mo I thought a flo leader would give me a little bit of an edge, you just answered my ? in one, cheers, what trace would you advise, I'v been buying the made up leads from my local tackle shop but I want to start throwing my own together, do you have any suggestions on which wire to use,swivels n snap links, cheers....
looks like we in same boat...i'm after starting up with trace making but there is that many crimps, wires,etc.. i'm lost...............what would the guys reccommend?
Re: flourocarbon leader
We've just done the trace making thing
Here
https://pikeangler.forumotion.com/pike-fishing-f1/home-made-traces-t733.htm
Adie
Here
https://pikeangler.forumotion.com/pike-fishing-f1/home-made-traces-t733.htm
Adie
Similar topics
» Leader set ups.. what do you use?
» Leader when using braid
» Flurocarbon leader
» Titanium leader :(
» Leader when using braid
» Flurocarbon leader
» Titanium leader :(
PikeAngler :: Fishing :: Pike Fishing
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|